VOOPOO Argus G3 Mini pod vape kit

The VOOPOO Argus G3 Mini is a refillable pod vape kit that is designed for both new & experienced vapers. The compact aluminium alloy design makes the device lightweight and ideal for on-the-go vaping & offers up to a days use on a single charge.

• 1350 mAh internal rechargeable battery
• 30 watts max power output
• Draw activated
• USB-C charging

Kit contains

• 1 x VOOPOO Argus G3 Mini pod device
• 1 x VOOPOO Argus 07 V2 ohm resistance pod
• 1 x USB-C charging cable
• 1 x User manual

Specifications

• Dimensions: 96 mm (height) x 26 mm (width) x 14 mm (depth)
• Battery capacity: 1350 mAh
• Max power output: 30 W
• Draw activated (no buttons)
• USB-C charging

VOOPOO Argus G3 Mini set up guide

• When you remove the VOOPOO Argus G3 Mini from the box you will find that the pod is preinstalled. Before use you will need to remove the pod and peel off the protective sticker from the base.
• Open the silicone stopper on the side of the pod and fill to around two thirds full with your chosen e-liquid, then replace the silicone stopper. When using a new pod it is recommended to let it sit with the e-liquid inside for 5 minutes before use to allow for absorption.
• Insert your pod and the device will automatically detect the coil and set the power output.
• The clear design of the pod means you can easily tell when the e-liquid is running low and you need to top it up. When the pod needs to be replaced you will usually notice a burnt taste or reduction in flavour. At this point simply remove the used pod and replace with a new one following the same steps above.
• When the battery is starting to run low, the LED indicator light on the front of the device will turn red. Plug your device into an appropriate power source using the included USB-C cable and allow it to remain on charge until the LED light stops flashing white.