About Innokin Prism-S coils

Pick up our Innokin Prism-S coils when you are looking for replacement coils for the Innokin EZ.WATT, Endura T20-S and Prism-S tank. These coils are made from high-quality materials and have an innovative no-spill coil swap design, which makes it easy to simply unscrew the base of the tank before removing and replacing the coil.

Ensure your new Innokin Prism-S coils are primed, by letting them sit in a tank full of e-liquid for 5-10 minutes before first use. This will help them last for longer.

Highlights of Innokin Prism-S coils:

• Available in 0.8 or 1.5 ohm resistance
• No-spill coil swap design
• Made from quality materials

Tanks compatible with Innokin Prism-S coils

Innokin Prism-S coils: are designed to be used with the Innokin EZ.WATT, Innokin Endura T20-S, and Innokin Prism-S tank.

What is in the box: Innokin Prism-S coils

With a box of Innokin Prism-S coils you will receive:

• 5 x Innokin Prism-S coils in your chosen ohm resistance

Innokin Prism-S coils FAQ

What wattage should I use Innokin Prism-S coils at?

The exact wattage you should use your Innokin Prism-S coils will vary depending on which ohm resistance level you have chosen. For example, Innokin Prism-S coils with a 0.8 ohm resistance are best used at a wattage of between 16-18 W, while 1.5 ohm coils should be used between 13-14 W.

How do you replace Innokin Prism-S coils?

It is easy to replace Innokin Prism-S coils. All you need to do is remove the base of the tank and then pull the old coil out of place. A new coil can be pushed into the spot, and the tank reattached to the device. Be sure to prime your new coil before first use.

What e-liquid should I use with Innokin Prism-S coils?

There are a wide range of e-liquids that you can use with Innokin Prism-S coils, the important thing is to match the ratio of your e-liquid to the coil you have chosen. The Innokin Prism-S coils are best paired with a 50/50 or high PG vape juice, but the flavour and nicotine strength is completely up to you.

How do I prime Innokin Prism-S coils?

You can prime Innokin Prism-S coils as you would any other – by dropping a little e-liquid onto the cotton before inserting it into the tank and then letting it sit in a tank full of e-liquid for 5-10 minutes before using it for the first time.