Geekvape Aegis Legend 3 kit

What is in the box: Geekvape Aegis Legend 3 kit

Included in the box of the Aegis Legend vape kit:

• 1 x GeekVape Aegis Legend 3 mod
• 1 x GeekVape Z Fli tank
• 1 x GeekVape Z Series coil 0.15 ohm resistance (pre-installed)
• 1 x GeekVape Z Series coil 0.4 ohm resistance
• 1 x Replacement 2ml glass tube
• 1 x USB-C charging cable
• User manual

Geekvape Aegis Legend 3 set up guide

• Remove the device and tank from the box.
• Unscrew the base of the tank and remove the pre-installed coil. If you would prefer to use a different resistance coil, this can be changed now. Dab a few drops of e-liquid onto the exposed cotton contacts on the coil and reinsert into the tank, ensuring it is aligned correctly.
• Screw the base of the tank back on and screw the tank on to the top of the device, without turning the device on.
• Push against the arrow on the top of the tank to open and insert the nozzle of your e-liquid bottle into one of the two fill ports (not the larger hole in the centre). Fill the tank to around two thirds full and close the top, then leave for 5 – 10 minutes to allow the e-liquid to fully absorb.
• Insert two 18650 batteries by releasing the battery door on the base of the device using the small switch. Insert the batteries according to the +/- symbols inside the device, then close the battery door.
• Press the fire button on the device five times in quick succession to turn it on, a welcome screen will show to indicate the device is turning on. Pressing the button again five times will turn it off.
• Press the button three times to enter the settings menu, to access options like mode, lock settings, and brightness. Use the +/- buttons to move through the menu, and the fire button to select.
• Enter the mode menu and select your preferred mode from smart, power, boosting, memory, eco, or TC-TCR.
• In smart mode, the device will automatically set the power output to suit your chosen coil, in power mode you can adjust the power output using the +/- buttons between 5-200W. In boosting mode, the power output will automatically adjust to the highest wattage compatible with your chosen coil, and memory mode will allow you to select from up to five of your previously chosen wattage settings. Eco mode the device will preserve battery life, and in TC-TCR mode you can adjust the temperature setting, which is only recommended for experienced vapers.
• Once you have chosen your power setting, press down on the fire button to vape. You can also adjust the airflow using the sliding ring at the base of the tank.
• The Aegis Legend 3 utilises a palm locking system. When your palm is on the back of the device it will unlock, and when your palm is no longer touching the back of the device it will lock. This is the automatic setting, but you can change to button lock using the lock setting menu.
• The remaining battery power is shown on the display screen. When the batteries need to be recharged this can be done by connecting the device to a suitable power source using the included USB-C charging cable, or by removing the batteries and charging them separately using a battery bay charger.

Geekvape Aegis Legend 3 kit FAQ

How do you charge the Geekvape Aegis Legend 3?

Charging the Geekvape Aegis Legend 3 is easy. All you need to do it attached the included USB-C charging cable to the Type-C port. While the device is charging, it will show you the individual battery percentages so you can see how close it is to fully charged. Alternatively, the batteries can be charged outside of the device on a battery bay charger. This vape kit takes 2 x 18650 batteries.

Is the Geekvape Aegis Legend 3 vape kit water resistant?

The Geekvape Aegis Legend 3 vape has been designed to withstand some tough environments and comes with an IP68 rating. This means it offers resistance to water, dust and shocks, making it a great choice if you love camping, clubbing and anything in-between. That being said, it is best to avoid getting the device wet just in case.