OXVA Vprime pod vape kit

Pods compatible with OXVA Vprime pod vape kit

OXVA Vprime refillable pods are compatible with the OXVA Vprime pod vape kit.

What is in the box: OXVA Vprime pod vape kit

When you choose an OXVA Vprime pod vape kit you will get:

• 1 x OXVA Vprime device
• 1 x OXVA Vprime pod 0.2 ohm resistance
• 1 x OXVA Vprime pod 0.6 ohm resistance
• 1 x USB-C charging cable
• 1 x User manual

OXVA Vprime set up guide

• Take your OXVA Vprime vape kit out of the box. The device comes with a 0.2 ohm pod preinstalled but if you prefer you can opt instead for the 0.6 ohm pod which also comes in the box.
• Lift the black silicone stopper from the side of your chosen pod and insert the nozzle of the e-liquid bottle. It is recommended to fill the pod to around two thirds full. Replace the silicone stopper and allow the pod to sit for 5 minutes before using to ensure the e-liquid is fully absorbed.
• Press the power button five times to turn your device on, you can do the same to turn it off again. Use the +/- buttons on the side of the device to adjust the wattage up and down to suit your chosen pod.
• Use the sliding switch on the side of the device, adjust the airflow setting to suit your preference.
• The clear design on the pod makes it easy to monitor your remaining e-liquid, so you can top it up whenever it is getting low.
• When you start to notice a lack of flavour or a burnt taste, this is usually the first indication that it is time to replace your pod, which you can do following the same simple steps above.
• The OXVA Vprime features a locking system, press the +/- button at the same time to lock or unlock the fire button, a lock symbol will show on the screen to confirm the device has been locked/unlocked.
• Press the fire button twice to enter the settings menu, where you can adjust the theme, light, and puff count settings. Use the +/- button to cycle through the menu and the fire button to select.
• The display screen allows you to keep track of your remaining battery life. When the battery runs low it can be recharged using the included USB-C cable connected to a suitable power source.

OXVA Vprime pod vape kit FAQ

How to lock the OXVA Vprime?

To lock the OXVA Vprime, simply hold the + and - buttons simultaneously. You can also power the device on and off with 5 clicks of the fire button.

How do you fill OXVA Vprime pods?

Boasting a user-friendly refill system, the OXVA Vprime pod kit uses OXVA Vprime refillable pods which have a convenient top-filling design. All you need to do is open the silicone seal on the filling port and fill with your e-liquid, making sure to stay below the 2ml mark. Seal the pod back up and allow time for the coil to prime before using. The pods also have a 5-layer leak-proof system so you can fill and go with confidence.